Thomsen #6 Sanitary Centrifugal Pump with VFD
Made in the U.S.A. by Thomsen Pump Company. Pump is mounted on a stainless steel cart with wheels for easy mobility.
One port is 1.5” TC and the other port is 2” TC.
Is rated by the manufacturer to pump 120 gallons per minute with 30’ of head at 1750 rpm. The VFD allows you to run this pump on either 3-phase power, or single-phase depending on how you wire it. Made of 316L stainless steel.
Can be used to pump a wide range of products at a wide range of temperatures. This pump is solidly built and should provide many years of service.
G.W. Kent stocks the most common replacement parts, such as internal seals.
• 316 stainless steel sanitary pump housing with 4 blade impeller delivers a smooth, steady flow.
• 2 h.p. motor, VFD 1 phase or 3phase input NEMA -4X
• A ceramic wear ring on backplates reduce wear and replacement cost.
• Mounted on stainless steel cart for mobility.
• Meets 3A sanitary standard.
• Connection: Inlet 2" TC and outlet 1.5" TC.
| Weight (lb) | 250.000000 |
|---|---|
| Model | E 6000 |
| Micron | 10 - 25 micron |
| Motor | 2 h.p. 3 phase 220 V |
| Flow Rate | 35 gpm |
