12" Backflush Plate - End
In stock
Catalog
3450-6
$245.00
12" Backflush Plate - End is available to buy in increments of 1
- Our Backflush Plates fit the Pall SupraDisc II Lenticular Filter Modules.
- Regeneration of modules includes a backflush followed by a forward flush. While backflushing is very effective at removing larger surface caking on the outside of the filter media, a forward flow regeneration helps to dissolve the soluble material within the matrix of the media.
- Backflush plates are highly recommended for regenerating the media modules. The plates provide additional support and reduce the risk of possible tearing or deformation of the modules, not just during backflushing, but also during forward flow regenerations, as well as during filtration at higher differential pressures. Backflush plates consist of end plates as well as thicker intermediate plates for more than one stacked module disc.
- The end plates appear somewhat loose and are not held down tightly. The backflush plate was ultimately designed to work with the turbulence of the liquid during a regeneration or filtration to protect the media and ensure a longer lifespan of the modules and quality of the filtrate.
- For 1-high Lenticular Filter Housing : 2 end plates are needed
- For 2-high Lenticular Filter Housing : 2 end plates and 1 intermediate plate are needed
- For 3-high Lenticular Filter Housing : 2 end plates and 2 intermediate plates are needed
- For 4-high Lenticular Filer Housing : 2 end plates and 3 intermediate plates are needed
