The Gladiator Keg Washer

Load your kegs, press start, and walk away - The Gladiator keg washer does the rest. It’ll even purge and pressurize your kegs with CO2 to your desired setpoint. With an industry-leading 24-step cleaning regimen that’s customizable per keg type, The Gladiator puts you in control.

We've partnered with Stout Tanks and Kettles to develop The Gladiator, a semi-automated 2-head keg cleaner that allows you to load 2 kegs, connect the valves, press start and walk away to perform other duties. The software controls ensure that the kegs are cleaned repeatably, and flexible parameter settings allow the user to customize the cleaning regimen per keg type to maximize throughput and cleanliness. Every keg washers is assembled and tested in our own manufacturing facility to the highest standards.

CIP Upgrade Module available. Catalog number 2567+CIP

Features

• Compact footprint: 41" W x 38" L x 64"H when assembled. (Control Panel extends the width 13" on the right side)
• UL and cUL Listed Control Panel with Touch Screen Control
• Cleans two kegs simultaneously for up to 40 keg/hr throughput (operator and parameter dependent)
• Software controls provide wide range of flexibility - all key cleaning parameters are software controlled including timing
• Save parameters per keg type (user defines each desired keg type)
• Automated system pressure monitor - unusual pressures will trigger stop
• Set desired final CO2 pressure using software control (pressure monitor verifies pressure is reached)
• Level sensor in caustic tank prevents element burnout due to low liquid level
• Clean and rinse keg spear with low flow operation via speed controlled caustic pump and low flow water inlet
• Pause and restart function included
• Ensure every keg is sanitized via peristaltic sanitizer pump
• Sanitizer is dosed per cycle and discarded after single use (making system suitable for dairy applications)
• Automated caustic temperature control (software controlled parameter setting)
• Keg counter tracks the number of kegs cleaned per session

Requirements

• Single Phase 208/240V - 50A circuit (supplied with NEMA14-50 plug)
• Three Phase 208/240V - 30A circuit (supplied with L21-30 twist plug)
• Water Supply: 1" NPT delivering 50-60 PSI to regulator
• Air Supply: 1/2" NPT delivering 75-125 PSI (15 SCFM minimum.) Ask about using dual compressors.
• CO2 Supply: 1/2" NPT delivering 30 PSI minimum