Cooling Plates - 8.9" x 39.4"

In stock
Catalog
282-13
$349.00
  • Heavy-duty cooling plates made from sanitary 19 gauge 304L stainless steel. 
  • Can be used to cool your fermenting must or wine in an open-top tank, variable capacity tank, or in a MacroBin. 
  • By re-circulating cold water or glycol through the cooling plates you can lower the temperature of your ferment.  You can also warm up your tank by re-circulating hot water through the cooling plates, for instance if you want to inoculate your wine with malolactic bacteria but your wine is too cold.
  • Pre-formed stainless steel channels with welding along its perimeter give it superior heat exchange and strength, up to 120 psi of pressure. 
  • Designed for food, beverage and dairy applications. 
  • The suggested flow rate is 4-7 gpm at 15 psi. 
  • The listed measurements are for the plate. 
    • The inlet and outlet pipes add an extra 11.8”. 
    • The ends of the pipes have a ½” NPT connection and also a ½” hose barb, so you can connect up to a threaded hose fitting or directly to a hose secured with hose clamps.
304 stainless steel.
More Information
Weight (lb) 55.000000
Width 18"
Micron 10 - 25 micron
Length 39"
Manufacturer Vintner
© 2024 GW Kent. All Rights Reserved.